You are at:

  1. Home »
  2. Topic »
  3. Highway Structures »
  4. Special Structures

Special Structures

Filter content

Filter by attributes
Filter by date

Documents

Title Document type Published Publisher
Prevention of Strikes on Bridges - A protocol for Highway Managers & Bridge Owners - Issue 2

Read document description

The Protocol gives guidance and advice to Highway Authorities and Bridge Owners to prevent strikes on bridges that span public highways

Primary Doc. 11/07/14 Department for Transport Add icon
PAS 68:2013 Impact test specifications for vehicle security barriers

Read document description

PAS 68 has been prepared to address the needs of organisations who want assurance that vehicle security barriers will provide the level of impact resistance they are aiming for. Many systems are available that are either promoted or considered suitable for use as vehicle security barriers. As their characteristics differ in both function and form, a comparative means of assessing their performance is required. PAS 68 identifies impact test methods, tolerances, test vehicle type and vehicle performance criteria that need to be met in order to conform to PAS 68. Design guidance for installing barriers is provided in PAS 69.

Primary Doc. 09/10/13 CPNI Add icon
PAS 69:2013 Guidance for the selection, installation and use of vehicle security barrier systems

Read document description

PAS 69 provides guidance on the selection, installation and use of vehicle security barriers to ensure that they are selected and placed as effectively as possible. PAS 69 intended to be used by designers, planners, architects, security managers and facilities managers within the public and private sectors.

Primary Doc. 09/10/13 CPNI Add icon
Management of Highway Structures Complementary Guidance

Read document description

Management of Highway Structures: A Code of Practice was published in September 2005. Since then Government Policy in respect to highway and structures management has developed and evolved in a number of areas, including the introduction of new statutory duties on highways authorities. There have also been developments/advances with regard to recognised good practice. To assist users of the Code, the Roads Liaison Group has prepared this complementary guidance which takes account of these changes and developments. Where appropriate, the complementary guidance provides details of where to find up-to-date information that can assist with the implementation of the good practice set out in the Code. Users of the Code should treat this complementary guidance as up-to-date and having the same status as the Code. Where paragraphs have been amended, they supersede the ones in the Code.

Primary Doc. 27/05/11 UK Roads Liaison Group Add icon
TAL 1/11 Vehicle security barriers within the streetscape

Read document description

This leaflet describes the reasons for using vehicle security barriers to protect both the public and key infrastructure from vehicle-borne threats. An overview of the integration of protection measures into the public realm is also covered.

Primary Doc. 02/03/11 CPNI Add icon
Integrated security - A public realm design guide for hostile vehicle mitigation

Read document description

This publication provides information and inspiration for those responsible for integrating protective security measures into the public realm, in order to mitigate threats from, and limit the damage caused by, terrorist attack. It is important that our surroundings remain open and inclusive and that the addition of physical security measures is integrated and proportionate to the assessed threat. The purpose of this guide is to assist the public realm design process and to encourage a positive and creative response to the challenges of counter-terrorism and protective security.

Secondary Doc. 01/03/11 CPNI Add icon
Level 2 operational requirements for hostile vehicle mitigation

Read document description

The Level 2 Operational Requirement (OR) for Hostile Vehicle Mitigation (HVM) measures follows on from the Level 1 OR to provide a more detailed picture of the HVM scenario and issues faced. The Level 2 OR can be used to investigate both existing and proposed HVM measures and can highlight specific vulnerabilities that require mitigation or management attention.

Secondary Doc. 01/03/11 CPNI Add icon
Management of Highway Structures Complementary Guidance

Read document description

Management of Highway Structures, the code of practice for highway bridge and structure maintenance management was published in September 2005. It provides local authorities with guidance on structures management in an ever changing environment, creating a strong foundation for a positive and lasting maintenance policy. Adoption of the recommendations in this code will help the delivery of Best Value services. The UK Roads Liaison Group and its Boards recognise that highways are a constantly changing discipline and have published Complementary Guidance to the Codes of Practice. The Complementary Guidance has the same status as the Code.

Primary Doc. 15/12/10 UK Roads Liaison Group Add icon
Vehicle security barrier scoping document

Read document description

This scoping document can be used by customers seeking proposals from potential Vehicle Security Barrier (VSB) suppliers. The information provided in this form will help suppliers to offer comparable quotations and solutions that meet both the customer’s security needs and operational requirements.

Secondary Doc. 01/10/10 CPNI Add icon
CWA 16221:2010 Vehicle security barriers. Performance requirements, test methods and guidance on application

Read document description

This CEN Workshop Agreement (CWA) has been prepared to address the needs of organisations who wish to have assurance that vehicle security barriers (VSBs) will provide the level of impact resistance which is sought. This CWA also provides guidance on the selection, installation and use of VSBs to ensure that they are selected and placed as effectively as possible. This CWA is intended to be used by designers, planners, architects, security managers and facilities managers within the public and private sectors.

Primary Doc. 01/10/10 CPNI Add icon
Showing results 1-10 of 13
  • 1
  • 2