You are at:

  1. Home »
  2. Topic »
  3. Safety and Security

Safety

safety web

The Documents list can be refined by using the Narrower terms and Filter content tools below.

The individual document link will direct you to a PDF of the document or its location where it can be downloaded or purchased.

Filter content

Filter by attributes
Filter by date

Documents

Title Document type Published Publisher
Designing for Walking

Read document description

This document explains how facilities for walking should be designed, following on from how they are planned, which is covered in Planning for Walking. Well-designed facilities that follow desire lines, are clutter-free, and are legible to all users will assist in enabling walking journeys and improve the experience of those already walking. The design of facilities should also consider the volumes of people walking along (actual or desired) or crossing streets, and the solutions will depend on a variety of considerations. The needs of all users should be carefully taken into account and prioritised as appropriate.

Secondary Doc. 19/03/15 CIHT Add icon
Planning for Walking

Read document description

This Chartered Institution of Highways and Transportation (CIHT) guideline Planning for Walking: • describes the characteristics of pedestrian journeys, • lists the benefits of walking, • identifies factors that discourage walking and how they can be overcome, • summarises the legal framework that applies to pedestrians and • outlines the way that plans and strategies for pedestrian travel are developed. As it is a web-based publication that can be modified relatively easily, CIHT would welcome examples that build on the content of this guidance for inclusion in further guidance on the subject. These guidelines are complemented by another CIHT document, Designing for Walking (CIHT, 2015), which covers the design and evaluation of facilities for pedestrians

Secondary Doc. 19/03/15 CIHT Add icon
Road Safety Observatory

Read document description

The Road Safety Observatory aims to provide easy access to independent road safety research and information for anyone working in road safety and for members of the public. It provides summaries and reviews of research on a wide range of road safety issues, along with links to original road safety research reports. The information on the Road Safety Observatory website is provided free of charge, and you do not need to register to use this website.

Useful Website 18/02/15 Department for Transport Add icon
TAL 8/14 Implementing extended working hours at road works

Read document description

What you need to take into account if you’re considering extended working hours to reduce overall site occupation times. This guidance focuses on works in urban areas where there is greater need to limit disturbance to residents and others.

Primary Doc. 12/11/14 Department for Transport Add icon
Prevention of Strikes on Bridges - A protocol for Highway Managers & Bridge Owners - Issue 2

Read document description

The Protocol gives guidance and advice to Highway Authorities and Bridge Owners to prevent strikes on bridges that span public highways

Primary Doc. 11/07/14 Department for Transport Add icon
Surface Dressing Code of Practice

Read document description

This sixth edition of the Code of Practice has been produced by the RSTA Surface Dressing Technical Committee. It has been reviewed in the context of the European Standard for Surface Dressing BS EN 12271 published in September 2006 along with the national guidance document PD6689:2009. This document has been peer reviewed by ADEPT Soils, Materials, Design and Specifications Committee. To the highway engineer, surface dressing offers a quick, efficient and cost-effective way of maintaining skid-resistant and waterproofing road surfaces. To obtain the best results it is necessary to give careful consideration to a wide range of detail and to plan and design the work carefully. The speed of the surface dressing operation and the short duration of time during which motorists are inconvenienced is also an important issue. The purposes of surface dressing are to waterproof the road surface, to arrest disintegration, to provide texture, and provide a skid-resistant surface. This latter quality can play a major part in accident reduction and was highlighted by the initiative of the Department of Transport in 1987 when the Minister introduced minimum mean summer SFC values for motorways and trunk roads. The importance of surface texture as provided by surface dressing has been highlighted by TRL report LR 286, which stresses that texture depth is important under both wet and dry conditions. Up to date guidance is available in the Design Manual for Roads & Bridges (DMRB): Volume 7 HD 28. The DMRB is available on line at www.dft.gov.uk/ha/standards/dmrb/. A useful way of comparing the effectiveness of a dressing, or other maintenance work, is to express it in terms of a ‘cost life index’. This is the cost per square metre of the work divided by the service life in years. It provides a measure of the “value for money” which the highway authority is achieving. A low ‘cost life index’ and “high value for money” is the result of high-quality work. The purpose of this Code is to identify the important aspects of the process, and to refer to other documents relating to good surface dressing practice and so give practical guidance on achieving high quality.

Product 01/02/14 unknown Add icon
PAS 68:2013 Impact test specifications for vehicle security barriers

Read document description

PAS 68 has been prepared to address the needs of organisations who want assurance that vehicle security barriers will provide the level of impact resistance they are aiming for. Many systems are available that are either promoted or considered suitable for use as vehicle security barriers. As their characteristics differ in both function and form, a comparative means of assessing their performance is required. PAS 68 identifies impact test methods, tolerances, test vehicle type and vehicle performance criteria that need to be met in order to conform to PAS 68. Design guidance for installing barriers is provided in PAS 69.

Primary Doc. 09/10/13 CPNI Add icon
PAS 69:2013 Guidance for the selection, installation and use of vehicle security barrier systems

Read document description

PAS 69 provides guidance on the selection, installation and use of vehicle security barriers to ensure that they are selected and placed as effectively as possible. PAS 69 intended to be used by designers, planners, architects, security managers and facilities managers within the public and private sectors.

Primary Doc. 09/10/13 CPNI Add icon
Traffic Signs Manual Chapter 4: Warning Signs (2013)

Read document description

2013 UPDATE - Through the Traffic Signs Manual, the Department for Transport provides guidance to traffic authorities and sign designers on good practice in respect of the design and use of traffic signs in order to provide appropriate and adequate information for road users. The Manual is published by TSO as a number of discrete chapters each of which deals with a specific signing topic. We have made changes to Chapter 4 to bring it up to date following the amendments that were made to the Traffic Signs Regulations and General Directions 2002. Chapter 4 of the Manual is concerned with signs that warn road users of hazards ahead and was last updated in 2008. The main changes relate to the signing of low bridges and on using the new triangular warning sign that indicates maximum height in both imperial and metric units. Bridge strikes, where vehicles, their loads or equipment collide with bridges, are a significant and recurring problem and the revised guidance gives highway authorities up to date information and demonstrates the Department’s ongoing commitment to tackling the risk.

Primary Doc. 30/07/13 Department for Transport Add icon
DSOPM004: Pedestrian Crossings

Read document description

This I’DGO design guidance relates to relates to pedestrian crossings. It was first published (in print and online) in July 2013 and launched at the annual conference of the Local Government Association. It is part of The Design of Streets with Older People in Mind; a toolkit for those who plan, design and maintain the public realm. It can be used as an aid to assessing the ‘walkability‘ of local neighbourhoods, particularly with regards to pedestrian safety and comfort. The guidance is based on the views over 1,600 pedestrians, street audits and key sources of existing UK guidance. It includes advice on providing accessible crossing amenities that send out a consistent message to all users and flags the importance of raising awareness among pedestrians as to how crossings work and why.

Secondary Doc. 02/07/13 Inclusive Design for Getting Outdoors (I'DGO) Add icon
Showing results 1-10 of 297